-----Original Message-----
From: Kinney John-r17512
Sent: Tuesday, April 03, 2007 10:12 AM
To: 'Dino Darling'
Subject: RE: [TowerTalk] 6 meter yagi by DX Engineering
Hi Dino,
I did call the current DX Engineering folks, and they had / have no
information about the antennas or the two fellows that were DX
Engineering in Oregon. Their comments were about the same, load the
dimensions into a modeling or optimizing program and see which one looks
the best. I have EZNEC from the ARRL antenna book but have never used
it. Guess I better get started.
Thanks for the reply,
John KA7CVJ
-----Original Message-----
From: Dino Darling [mailto:dino@k6rix.com]
Sent: Tuesday, April 03, 2007 10:04 AM
To: Kinney John-r17512
Cc: towertalk@contesting.com
Subject: RE: [TowerTalk] 6 meter yagi by DX Engineering
Actually, the current "DX Engineering" folks bought the company from the
Oregon folks. They may be able to help you. I have heard rumor (first
hand) that they may come out with antennas again...specifically their
log periodic.
You have probably already contacted them. If this is the case, scan the
manual and maybe someone can plug it into a modeling program for you.
Dino - K6RIX
dino@k6rix.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|