At 05:35 AM 3/18/2007, Martin Sole wrote:
>Folks,
>
>Just talking with a friend about a 'wind problem' is there a nice
>formula that will give a reasonable estimate of the likely wind
>survivability based on:
>
>a mass A of surface area B suspended C distance up on a pipe of yield
>strength D.
>
>
>Thanks
>
>Martin, HS0ZED
Depends on what you call "reasonable"
You can estimate it by taking
Wind drag = rho*Cd*Area*Vwind^2, where rho is density of air and Cd
is the drag coefficient of your thing
A cylinder (e.g. a pipe) has a Cd around 1 (sometimes lower,
sometimes higher, depending on size of pipe and speed of wind)
The bending moment developed at distance C from the ground is roughly C * Fdrag
You also need to add the drag of the pipe itself, which for
approximation can be considered as acting at a point halfway along the length
There's a standard formula for the strength of a hollow tube of a
particular material (I don't remember it off the top of my head..)
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|