To All -
Yes, as far as vandalism goes, this is not by any means a complete solution,
but at least it keeps the neighbor's 8-year old from doing it with a
jack-knife or local critters from chewing on the Philly. Also, I feel it
provides a better method for installing the guys. You can put a come-along
on the EHS as well as a tension gauge. Aside from the vandalism/ground fire
reasons, there are other good reasons to terminate the end of the guy in
EHS. If it's too much trouble, however, you're probably fine just running
Philly to the ground.
73, Bob - W3YY
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Dale Martin
Sent: Wednesday, February 14, 2007 8:59 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Guy breakup at tower...
>You are also able to move the Phill up out of easy vandalism access.
>
>
Okay. Forgive my ignorance here. I'm not trying to be a wiseacre, but....
If vandalism access is such concern that you terminate the phillystran run
out of reach, what do you do to secure your guy grips at the guy anchor
point?
Cutting philly is not the ONLY damage a vandal can do, right?
He/she could simply unwind the top EHS guy grip at the guy anchor. A pair
of pliers to get the unwinding started, then the rest is an easy thing to do
by hand...
How do you secure your guy grips from vandals?
73,
Dale, kg5u
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|