I don't recall what the self supporting height is for 65 or what it can hold
at that height. You didn't say what you were going to put in it.
I have a 70ft AN wireless tower and it calls for more concrete than what you
spec.
Do what the manufacturer says.
The idea of having to put temporary guys sure scares me. What if you are
not at home etc.....
Mike W0MU
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Bob Maser
Sent: Monday, February 12, 2007 11:04 AM
To: Talk Tower
Subject: [TowerTalk] Tower foundations
I have a 3x3x3 foot concrete foundation in my front lawn that I have been
using for my HyGain HyTower antenna. MY plan is to remove the HyGain and
enlarge the foundation to 6x6x4. I have heard that it is possible to hammer
drill holes in concrete, pour in a 2 part epoxy, and insert threaded rods
and this will be strong enough to be used for attaching a tower. I want to
put up 60 feet of Rohn 65 and have it be self supporting unless a hurricane
comes through the area, in which case I would put temporary guys on the
tower. Does anyone have experience with this epoxy method and can give me
some direction on doing this?
Thanks,
Bob W6TR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|