If you use the ebay supplier, do be sure to check the cost of
shipping!!! (ouch)
Steve Katz wrote:
>Garry, these are fine. The 83-1SP has a silver plated body and pin, and
>astroplated shell (which doesn't matter, since you don't solder to the
>shell).
>
>73
>
>Steve WB2WIK/6
>
>
>Hi Steve,
>
>I was searching the web tonight for the Amphenol 83-1SP PL259's and found a
>model on Ebay advertised as "Amphenol Silver-plated Top quality, Diallyl
>Phtalate (MIL-M-14F) insulated (temperature and insulation characteristics
>similar to teflon) Silver Plated Amphenols with Nickel Astro-plated shells,
>Silver-plated center pin and shield."
>
>Is this the model to stay away from? Where they say silver plated pin and
>shield, it sounded like the only part that was Astro-plated was the shell
>that screws onto the SO-239.
>
>I found this at:
>http://cgi.ebay.com/AMPHENOL-PL259-CONNECTOR_W0QQitemZ5869276102QQihZ008QQca
>tegoryZ7285QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
>
>
>Thanks,
>Garry
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|