Towertalk
[Top] [All Lists]

[TowerTalk] Yaesu G-1000DXA control box: pointer error

To: Towertalk <towertalk@contesting.com>
Subject: [TowerTalk] Yaesu G-1000DXA control box: pointer error
From: Eric Scace K3NA <eric@k3na.org>
Reply-to: eric@k3na.org
Date: Tue, 30 Jan 2007 00:10:02 -0500
List-post: <mailto:towertalk@contesting.com>
Hi folks --

   At W1KM the 10m stack is rotated by a Yaesu G-1000DXA.  The stack is 
side-mounted so we only get about 300Â of azimuth coverage.

   The control box does not track direction very well.  At the full CCW 
limit (330Â), we can set the pointer for the correct direction.  The 
display reads out correctly from NW through E.  Thereafter the indicator 
moves smaller and smaller distances ... so that, by the time the antenna 
is pointing SW, the display indicator is 45Â behind (i.e., pointing S).

   Recently this problem became worse.  The indicator no longer tracks 
even in the previously-correct NW-through-E sector.

   We suspect something has gone wrong in the electronics within in the 
control box... but wonder if anyone else has had -- and fixed -- this 
problem.

   Thanks.

-- Eric K3NA
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Yaesu G-1000DXA control box: pointer error, Eric Scace K3NA <=