Towertalk
[Top] [All Lists]

Re: [TowerTalk] coax input panel

To: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] coax input panel
From: Cqtestk4xs@aol.com
Date: Wed, 17 Jan 2007 00:29:05 EST
List-post: <mailto:towertalk@contesting.com>
 
In a message dated 1/17/2007 5:22:29 A.M. Greenwich Standard Time,  
k7awb@msn.com writes:

1)  Should I use a aluminum panel so all coax cables and hardlines are  
grounded together and to a ground rod or should I use a Plexiglas panel so  
they are all insulated from each other?  Would 1/8" be a good  thickness?


All together....all at same potential.  And, make sure you have some  sort of 
good dround at the bulkhead with Polyphasers or something similar.
 
Bill K4XS/KH7XS
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>