What kind of tower is it mounted on?
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Tim Duffy K3LR
Sent: Friday, January 12, 2007 1:04 PM
To: Cqtestk4xs@aol.com
Cc: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] TIC RINGS
Hello Bill!
I have had a full-size 4 element 40 meter Yagi on a 50 ft boom (25 sq. ft of
wind load) mounted on a TIC 1032 Ring Rotor with two motors for 14 years at
120 feet with no problems.
73!
Tim K3LR
http://www.k3r.com
Cqtestk4xs@aol.com wrote:
> My efforts to get a tower up in KH6 have taken a slight turn and I may
> have to make modifications to my tower plans since the county is
> screwing around with me (long story, and not surprising).
>
> Anybody out there have experience with using TIC Rings to rotate a BIG
> antenna...specifically a MonstIR SteppIR...about 21 square feet? I
> may have to go this route and need to know if it is a viable
> alternative. No way would a traditional swingarm sidemount (310 degree
coverage) work for this monster.
>
> Anybody have an answer for this one?
>
> Bill K4XS/KH7XS
> _______________________________________________
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|