Towertalk
[Top] [All Lists]

Re: [TowerTalk] W2DU Balun Bead Source

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] W2DU Balun Bead Source
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Tue, 9 Jan 2007 16:23:02 -0600
List-post: <mailto:towertalk@contesting.com>
There is a good discussion of baluns in the current issue of QST written by
Ward Silver.  The bead balun is a good choice.

73, Keith NM5G

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Cecil Moore
Sent: Tuesday, January 09, 2007 2:17 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] W2DU Balun Bead Source

>From: "R. David Eagle" <kb8nnu@yahoo.com>
>Subject: [TowerTalk] W2DU Balun Bead Source Howdy all...I am looking at 
>constructing 2 W2DU bead baluns as described in ARRL Antenna book that 
>uses 12 Amidon FB-77-1024 beads.

Not trying to change your mind, but you get more balun for the money with
multi-turn toroids. Multi-turn toroids yield a choking impedance
proportional to the square of the number of turns. Turns are cheap. W2DU
baluns yield a choking impedance proportional to the number of beads. Beads
are expensive. I have the very W2DU chokes that you want to build and don't
use them.
--
73, Cecil, w5dxp.com

_________________________________________________________________
Dave vs. Carl: The Insignificant Championship Series.  Who will win? 
http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://dav
evscarl.spaces.live.com/?icid=T001MSN38C07001


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>