Very true....cheap too
Regards
Dave Harmon
NSRCA 586
K6XYZ[at]sbcglobal[dot]net
Sperry, Ok.
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of kd4e
Sent: Wednesday, December 20, 2006 9:58 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Very Old Grease Characteristics
> We are stymied in our work to bring the Jamesburg 30 meter dish back into
> operation. The dish is currently in the "stowed" position, pointing
> straight up. It is locked in that position by a 3" diameter stainless
steel
> "pin" that is electrically driven up a cylinder, into a hole in the heavy
> steel elevation motion system.
Have you tried PB-Blaster?
I have not yet found anything that it is not
successful in penetrating and loosening.
--
Thanks! & 73, doc, KD4E
... in sunny & warm Florida :-)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thank our brave soldiers this season:
http://www.letssaythanks.com/Home1024.html
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
URL: bibleseven (dot) com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|