Towertalk
[Top] [All Lists]

Re: [TowerTalk] Tram rope

To: dezrat@copper.net, TowerTalk@contesting.com
Subject: Re: [TowerTalk] Tram rope
From: k1vr@juno.com
Date: Tue, 19 Dec 2006 13:29:59 -0500
List-post: <mailto:towertalk@contesting.com>
 
On Tue, 19 Dec 2006 10:20:55 -0800 Bill Turner <dezrat@copper.net>
writes:
> ORIGINAL MESSAGE:
> 
> On Sun, 17 Dec 2006 21:58:03 -0000, "David Robbins K1TTT"
>  <k1ttt@arrl.net> wrote:
> 
> >I use 1/4" EHS guy wire for my trams.  The forces on a tram can be 
> huge if
> >you aren't careful.
> 
> ------------ REPLY FOLLOWS ------------
> 
> May I ask how you terminate the ends? Is EHS flexible enough to 
> wrap
> around a thimble and use clamps or do you need to have swaged ends?
> 
> Or something else?
> 
> Thanks,
> 
> Bill, W6WRT


EHS will go around a thimble. It can be held in place by clamps or a dead
end. Think about leaving in a turnbuckle, to tighten the line.

Fred Hopengarten K1VR        hopengarten@post.harvard.edu
Six Willarch Road * Lincoln, MA 01773-5105
781/259-0088; FAX 419/858-2421
www.antennazoning.com
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>