Towertalk
[Top] [All Lists]

[TowerTalk] 80m vertical

To: <TOWERTALK@contesting.com>
Subject: [TowerTalk] 80m vertical
From: <john@kk9a.com>
Date: Sat, 16 Dec 2006 14:06:04 -0500
List-post: <mailto:towertalk@contesting.com>
The concrete base is not a good insulator.  You could drain any static 
charges by using a hairpin coil match or a large inductor.

John KK9A



To: towertalk@contesting.com
Subject: [TowerTalk] 80m vertical
From: K9IL
Date: Sat, 16 Dec 2006 12:48:57 EST
List-post: <mailto:towertalk@contesting.com>

I'm considering replacing my 1/2 square with a 1/4 wave vertical. The wires
keeping breaking in the storms. What I would like to know is if anyone is
using  Rohn 20/25 as an 80m vertical. I'm sure the physical size is shorter
because of  the large diameter. If you use a concrete base, that should make
it
virtually  insulated from ground. Another consideration is  lightning
protection.
You can disconnect the feed when not in use but would a  gap type arrestor 
be
sufficient to drain static charges?say a 1/4'' one. Anyone  out there using
something similar?

k9il 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] 80m vertical, john <=