Towertalk
[Top] [All Lists]

Re: [TowerTalk] Subject: Sealing Some connectors

To: K7LXC@aol.com, towertalk@contesting.com, hsmiller@awsllc.net
Subject: Re: [TowerTalk] Subject: Sealing Some connectors
From: ersmar@comcast.net
Date: Sat, 16 Dec 2006 16:51:07 +0000
List-post: <mailto:towertalk@contesting.com>
 -------------- Original message ----------------------
From: K7LXC@aol.com

>  
>     And then the top 2 or 3 layers of 33 or 88 again  and you've got a 
> bombproof joint.
>  
> Cheers,
> Steve      K7LXC
> TOWER TECH 
> 

.....to which I would add:  Wind these three layers of 33 or 88 tape onto the 
connector first upward, then downward, then upward (if the connector will hang 
vertically.)  In this way you will be forming an outer layer like roofing 
shingles on top of the connector, allowing water to flow OVER the tape rather 
than INTO it at the edges.

73 de
Gene Smar  AD3F
a "know-code" Ham 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>