Jim,
Big Grip installation instructions are at:
http://www.preformed.com/artsfest/files/AppProc/SP2049-3.pdf
Use heavy duty thimbles, 3/8 inch is okay.
Typically the big grip is installed so that the first crossover marks are close
to the end of the guy strand, but the distance isn't critical.
73!
Frank
W3LPL
---- Original message ----
>Date: Fri, 08 Dec 2006 22:02:21 -0600
>From: "KC4HW" <jimjohnson@alaweb.com>
>Subject: [TowerTalk] Assembly Instructions for 3/16 grips and guywire
>To: towertalk@contesting.com
>
>Anyone know of any illustrations on the web to show the proper assembly of
>3/16 grips and EHS guys. I plan to use 3/8 thimbles.
>
>Should the EHS actually extend into the loop of the grip?
>
>Jim/KC4HW
>http://www.AlabamaContestGroup
>http://www.AlabamaQSOParty.org (June 2nd and 3rd, 2007)
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|