If you have a west marine store nearby they will crimp them for you.
73
Gary K4FMX
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of FISCHER,GREG
> Sent: Friday, December 08, 2006 6:37 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] Crankup tower cables
>
> After exhaustive research and many many replies regarding
> nicopress cable swaging, I think I may plunge and buy
> their swag tool for 1/8, 3/16 and 1/4 cable.
>
> Before I do, I was wondering about other folks here who
> have crank up towers who would be interested in having me
> make up cable assemblies for far less than what a
> manufacturer would charge.
>
> For example, a friend of mine was quoted $85 before
> shipping for one cable assembly from US Tower for a
> TX-438. About 44ft of 1/4 7x19 galvanized aircraft cable.
> Not sure of prices yet if I do this, but I think I would
> do it for about $35-$40 plus shipping.
>
> Assembly would be in accordance with the Nicopress
> instructions and each crimp checked with their gauge. I
> would only use zinc plated copper nicopress sleeves as
> stainless requires the use of a pneumatic or hydraulic
> press on 1/4 inch cable.
> Although assembly would be in accordance with their
> instructions, I would also require a signed waiver of
> liability for my own protection.
>
> Anyone who may be interested in something like this please
> let me know.
>
> Thanks
> Greg
> AB7R
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|