I have a 1000 rotating a F12 C-4XL at 150 feet. It has worked flawlessly
since 1999.
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of JMLTINC@aol.com
Sent: Friday, December 08, 2006 4:41 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Ham IV vs Yaesu
Hi gang,
I am writing for a friend who is not Internet enabled.
He has been a Ham IV user since it's introduction. As a moicrowaver, his
towers see a good load. He keeps a spare rotor to swap out when one in
service fails, which is often.
He is now considering replacing these (as they fail again) with Yaesu
G1000-DXA's.
You opinions between these two rotors (only these please) is greatly
appreciated.
Thanks,
John, N9RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|