If you remplace a cable or add another you can use
again the same wire , not the same with ties or tape.
the wire is thes option
the quality of how looks depend of you. but you can do
a professional job very cheap and secure.
Hector
--- k1vr@juno.com wrote:
> I prefer 10 inch pieces of AWG #14 THHN (solid
> copper center, insulated
> wire). Wind it around and twist 3-4 times with
> pliers. Not too tight or
> it will break, as well as crush soft cables. Bend
> end to parallel the leg
> of the tower, so it doesn't stick into your hand as
> you climb. Does not
> deteriorate in the sunshine, does not flap.
>
> Fred Hopengarten K1VR
> hopengarten@post.harvard.edu
> Six Willarch Road * Lincoln, MA 01773-5105
> 781/259-0088; FAX 419/858-2421
> www.antennazoning.com
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
>
http://lists.contesting.com/mailman/listinfo/towertalk
>
Hector Garcia XE2K / XF1K
Mexicali B.C DM22fp
http://www.dxxe.org
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|