Maent to send to the list - sent direct to Tom - reposting
On 11/29/2006 Tom Osborne wrote:
> Hi Robert
> A trick I learned years ago is to take a pair of vice grips and grip a
> screwdriver in the outer end of the tube, with the handle towards the boom,
> Then hit the screwdriver with a hammer. <snip>
I don't thing I've seen anyone mention HEAT - get out your hot air gun
(like what you use to shrink heat shrink) - and on the high setting,
heat the tubing - as it gets warm before the inside tube, you might
get some differential expansion there - might also free it up enough
to get a good penetrating oil in there (I like Kroil)
--
73 de KG2V
For the Children - RKBA!
Give Pizza Chants
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|