Peter,
Be very careful with those 6 pin C-J connectors! They provide no protection
from misalignment, and its a mistake easily made (three pins engaged, and three
pins not engaged). The consequences can be very serious.
73!
Frank
W3LPL
---- Original message ----
>Date: Tue, 21 Nov 2006 19:51:47 -0500
>From: Peter Dougherty <w2irt@comcast.net>
>Subject: Re: [TowerTalk] Source of 6/8 pin connectors?
>To: towertalk@contesting.com, towertalk@contesting.com
>
>At 03:13 PM 11/21/2006, towertalk-request@contesting.com wrote:
>
>>Does anyone have any suggested sources for Cinch-Jones (or whatever) plug
>>and socket sets for rotor control or whatever? I'm thinking 6 or 8 pins.
>>Part numbers would be helpful. I looked at Mouser but am not sure of
>>manufacturer/part. Thanks.
>
>Just ordered some 6-pin Male and Female C-J's from Mouser last week.
>Their part number 538-13061 for male 6 pin and 538-23061 for female 6
>(this is inline, not panel-mount, non-locking). I didn't see an 8-pin
>one offered manufactured by Cinch. Molex makes the same type of plug,
>with 8 conductors.
>
>Cinch products are on P. 1102 of the current catalog (#628), and
>Molex equivalents are on P. 1112. If you have a different catalog,
>look in the index under Connectors, Jones.
>
>
>
>Cheers,
>
>Peter,
>W2IRT
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|