Towertalk
[Top] [All Lists]

[TowerTalk] Aluminum wire radials

To: "T talk" <towertalk@contesting.com>
Subject: [TowerTalk] Aluminum wire radials
From: "Dan Hearn" <dhearn@air-pipe.com>
Date: Fri, 17 Nov 2006 07:40:57 -0800
List-post: <mailto:towertalk@contesting.com>
I used aluminum wire radials on a Hy Tower in Dallas TX. After a year or so
I pulled on the radial wires at the tower base and a short piece of wire
came out of the ground. They were severely corroded thru. The soil there is
alkaline and has very good conductivity. A 4square array installed later
using nr 16 solid bare copper wire worked for years with no such problems.
  The ground conductivity map in the ARRL handbook shows a large band of
high conductivity running north/south through the central states. I wonder
if most highly conductive ground is alkaline. The 4 square worked great, Hi.

73, Dan, N5AR

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>