Towertalk
[Top] [All Lists]

Re: [TowerTalk] Turnbuckles

To: Al Williams <alwilliams@olywa.net>
Subject: Re: [TowerTalk] Turnbuckles
From: Joe Giacobello <k2xx@swva.net>
Reply-to: k2xx@swva.net
Date: Mon, 09 Oct 2006 12:42:39 -0400
List-post: <mailto:towertalk@contesting.com>
I have had turnbuckles on my boom truss completely unscrew because of 
the buffeting from the wind.  That might be at least a part of Dennis' 
problem.  When I reassembled the turnbuckles, I used thread locking 
adhesive, and they've been stable ever since.

73, Joe
K2XX

Al Williams wrote:
> Two years ago someone snipped all but two threads  of the cable wire that is 
> used to tilt/raise my LM470 crankup.  Fortunately I noticed the cut before 
> tilting the tower down.  The tower had not yet had an antenna attached. 
> There were a couple of mischievous teenagers living in a rental within sight 
> to the towers that I suspect.  They have since moved but I now always take a 
> quick look before operating the tower.
>
> k7puc
>
>
> ----- Original Message ----- 
> From: "Dennis OConnor" <ad4hk2004@yahoo.com>
> Sent: Monday, October 09, 2006 5:30 AM
>   What to me wondering eyes should appear but loose turnbuckles, with one of 
> them (a 120' guy) having turned out until there were only 3 threads left 
> engaged on each end...  Some kind soul had taken the 90' and 120' turn 
> buckles and un-weaved the ends of the EHS from from the turnbuckle... 
> Whether he also deliberately unscrewed the buckles almost completely apart 
> or just left them
>   
>> to vibrate, I cannot tell..
>> This is annoying... I live in a very rural area back in the woods and a 
>> quarter mile from the nearest road... To get to my towers one would have 
>> to walk in a minimum of a half mile across crop fields and then through 
>> heavy brush and woods...  This is the first time in 45 years as a ham I 
>> have ever found my towers tampered with...
>> Now, some kind soul will tell me to clamp the buckles or use a padlock... 
>> The problem is that if they are up to mischief they will simply bring 
>> tools...  And it wasn't an impulse deal because he went around to all 
>> three of the 90-120 guy sets...  Apparently I have a friend out there... 
>> grrrr....
>>
>> denny / k8do
>>
>>     
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>   

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>