I looked for an LMR-600 equivalent and didn't find one. Is there such an
animal?
Fortunately a kind soul gave me 200 feet of 5/8" Heliax which will work just
fine for either 6 or 2-meters. Now I need one more run and a relatively
inexpensive and low loss way to switch the antennas between the shop and
house. I'm going to plug the rotator into the computer next to the station.
Then control it from the shop through the network rather than switching the
8 conductor cable.
Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com (Use return address from home page)
> Commscope is a bit less expensive, at least via The RF Connection. I'm
> very happy with the CommScope LMR 400 equivalent performance. I have
> not researched nor tried the Belden LMR400 equivalent. 73 bob de w9ge
>
>>>Can someone provide a comparison between LMR-400 and the equivalent
>>>cables
>>>
>>>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|