However can also been done a lot simpler forexample with
a "Hardy disc".
/SM2EKM
---------
Jim Jarvis wrote:
> W3GM used bottom mount rotors on all of his 100' 25g towers.
>
> The actual mast and the 'torque tube' were of different material.
>
> He used thin-wall irrigation tubing, 100' of which weighed maybe
> 20 lbs. No idea what % of that was carried by the rotor, and what %
> might have been hanging from the thrust bearing. The load was
> light, in any case.
>
> The effect of this was to allow the arrays.. 3 el fullsized 40, for
> example...
> to rotate in the wind somewhat, taking peak loads off the rotor. I think he
> turned the 40m array either with a tailtwister or a ham-4. In the time
> I operated from there, maybe 4 seasons, I never remember a major rotor
> problem.
>
> n2ea
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|