Towertalk
[Top] [All Lists]

Re: [TowerTalk] When was the first tower & beam used?

To: "Terry Gerdes" <terry@ab5k.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] When was the first tower & beam used?
From: Jim Lux <jimlux@earthlink.net>
Date: Tue, 12 Sep 2006 19:21:21 -0700
List-post: <mailto:towertalk@contesting.com>
At 05:09 PM 9/12/2006, Terry Gerdes wrote:
>Jim,
>
>I have copies of a few pages from the Basset Handbook of Rotary Beam 
>Design for 1939.  The Bassett folks had a series of commercial 
>products like a 4 element 20 meter antenna with a rotor for 
>$121.  The boom was not round but looks more like a ladder.


Interesting.. What was the design of the 4 element antenna?  I don't 
know that Yagi-Uda design was known by then, certainly not widely.

That was a pretty pricey antenna.. $121 in 1939 is $1771 in 2006 if 
you use the CPI
http://data.bls.gov/cgi-bin/cpicalc.pl


>They also had some interesting tower sections that were made of 
>wood.   For $88, you could purchase a 36 foot wood tower that was 3 
>feet square at the bottom and 15 inches square at the top.  Each 
>tower section was 6 foot in length.
>
>I'm also interested in other options on the market from this era.
>
>73 Terry - AB5K


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>