Hi Jim, I found your comments below interesting. Do you really see an
advantage using solid wire over stranded for a given size? I would have
guessed stranded was more stable and stronger and maybe I have had it wrong
all these years.
Gedas
online image gallery at http://gedas.cc
e-mail address at w8bya (at) mchsi (dot) com
web page at http://www.w8bya.com
----- Original Message -----
From: "Jim Brown" <jim@audiosystemsgroup.com>
To: "Tower Talk List" <towertalk@contesting.com>
Sent: Saturday, September 02, 2006 11:43 AM
Subject: Re: [TowerTalk] Ernesto ate my windom
> On Sat, 02 Sep 2006 11:21:01 -0400, Jim Jarvis wrote:
>
>>The #14 PE insulated superflex
>
> What is "superflex?" Do you mean "flexweave?" I tried some #12 on
> several antennas, and it broke in less than a year on all of them.
>
> I'm a firm believer in POC -- plain ordinary copper -- that I buy
> from my local hardware or electrical supply store. Antennas that
> must withstand big stress are #10 solid, the rest are #12 solid.
>
> Another important thing I learned (the hard way) is to never put
> solder where it will stress or move. Put the stress on unsoldered
> lengths of wire, then loop the wire over to where you're going to
> solder it (or otherwise secure the connection). Yes, it adds some
> inductance. So what -- it simply adds to the length of the antenna,
> so you cut it slightly shorter.
>
> If you want to be stealthier, use black insulation or bare copper.
> Stranded wire corrodes faster. If you must use stranded wire, use
> very good insulation on it, and pay careful attention both to the
> stress you place on the ends and the protection of exposed ends from
> corrosion.
>
> 73,
>
> Jim Brown K9YC
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|