Received the following from Nathan, NW3Z:
"Thanks... I forwarded the warning to NOT USE EZNEC for the antenna!
Could you do me a favor and post a reply cautioning people that there
are a lot of very complex interactions with the antenna that can only
really be modeled with a full NEC4 model.... and even then there are
some issues. Recommend ONLY building to the May 1998 QST article....
we know that one works!"
>X-Original-To: towertalk@contesting.com
>Delivered-To: towertalk@contesting.com
>X-Greylist: delayed 00:06:52 by SQLgrey-1.7.3
>X-Sender: legacycenter3@mail.rdu.bellsouth.net
>Date: Tue, 8 Aug 2006 17:47:04 -0400
>To: towertalk@contesting.com
>From: Robert Katz <rob.katz@thelegacycenter.com>
>X-Virus-Scanned: by amavisd-new at contesting.com
>X-Mailman-Approved-At: Tue, 08 Aug 2006 17:55:39 -0400
>Subject: [TowerTalk] EZNEC model for 40 meter v-yagi (NW3Z/WA3FET)
>X-BeenThere: towertalk@contesting.com
>X-Mailman-Version: 2.1.7
>List-Id: "Tower and HF antenna construction topics."
><towertalk.contesting.com>
>List-Unsubscribe: <http://lists.contesting.com/mailman/listinfo/towertalk>,
> <mailto:towertalk-request@contesting.com?subject=unsubscribe>
>List-Archive: <http://lists.contesting.com/pipermail/towertalk>
>List-Post: <mailto:towertalk@contesting.com>
>List-Help: <mailto:towertalk-request@contesting.com?subject=help>
>List-Subscribe: <http://lists.contesting.com/mailman/listinfo/towertalk>,
> <mailto:towertalk-request@contesting.com?subject=subscribe>
>Sender: towertalk-bounces@contesting.com
>X-Virus-Scanned: by amavisd-new at contesting.com
>X-callisto-MailScanner-Information: E-mail support@arrl.net for any assistance
>X-callisto-MailScanner: Found to be clean
>X-callisto-MailScanner-SpamCheck: not spam, SpamAssassin (score=-2.599,
> required 6, autolearn=not spam, BAYES_00 -2.60)
>X-callisto-MailScanner-From: towertalk-bounces@contesting.com
>
>Hello all,
>
>Does anybody have an EZNEC file for the 40 meter beam described in
>May 1998 QST by NW3Z and WA3FET? This is an interesting design with
>a full size driven element and wire elements for reflector and
>director. I'm thinking of building one and I'd like to play around
>with the model. Has anybody built one themselves?
>
>Thanks and 73,
> Rob, KA1ARB
>--
>Rob Katz, Director
>Legacy Center, Inc.
>
>(919) 678-6000 x106
>(919) 678-6015 fax
>rob.katz@TheLegacyCenter.com
>www.TheLegacyCenter.com
>_______________________________________________
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|