The manual is available online.
http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=104&encProdID=yN9ulhWwjG4%3D&DivisionID=65&isArchived=0
The connector is available from Yaesu for around $50 I believe.
John KK9A
To: <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] Yaesu Rotor G-2800 SDX
From: "John Wagner" <jwagner@dxengineering.com>
Reply-to: jwagner@dxengineering.com
Date: Fri, 4 Aug 2006 08:34:48 -0400
List-post: <mailto:towertalk@contesting.com>
Speaking of the 2800 SDX ..does anyone have a manual/schematic for one and a
source for the circular connector
on the rotator?
Thanks, John W8JJW
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|