Towertalk
[Top] [All Lists]

Re: [TowerTalk] removing elements

To: towertalk@contesting.com
Subject: Re: [TowerTalk] removing elements
From: <donovanf@starpower.net>
Date: Fri, 30 Jun 2006 13:31:59 -0400 (EDT)
List-post: <mailto:towertalk@contesting.com>
After lubricating the joint, a trick that works well is to use 5/8" 
diameter tubing as a hammer to drive the 3/4" element out of 
the joint.   

73!
Frank
W3LPL
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>