All coax cables running up my tower are terminated with PL259 connectors at
the tower base. These are connected using barrel connectors to coax cables
running through conduit to the aluminum bulkhead in the shack window. I
have Polyphaser clamps that attach to the tower leg and provide for copper
wire connection on the outside.
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of K8RI on Tower talk
Sent: Tuesday, June 27, 2006 1:41 PM
To: towertalk reflector
Subject: Re: [TowerTalk] Coax Grounding on a tower.
> Did you consider the Polyphaser grounding kits? AFAICS from the
> literature, you strip off the outer jacket, clamp one end of the
> copper
I'd never heard of them. I'll have to look into them if I can find the
information. I've been reluctant to cut the jacket any place to make up
something like this, but the Polyphaser might be just what I'm looking for.
Roger Halstead (K8RI and ARRL 40 year Life Member) N833R - World's oldest
Debonair CD-2 www.rogerhalstead.com
[snip]
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|