Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rotator Questions

To: "Al Williams" <alwilliams@olywa.net>,"Tower Talk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Rotator Questions
From: "Mike Harris" <mike.harris@horizon.co.fk>
Date: Mon, 12 Jun 2006 20:27:33 -0400
List-post: <mailto:towertalk@contesting.com>
G'day,


| The M2 2800 rating of 35 sq feet is comparable to my own rating of 400
sq
| feet (on an absolute calm day!).  Without a specified wind speed the
rating
| is meaningless?

An interesting point.  Maybe there is someone out there who can offer
clarification on this.

I found the windloading of the Optibeam OB9-5 somewhat confusing:

Windload at 130km/h    578N / 0.72m sq / 7.8 ft sq

I received the following from Thomas at OB:

<quote>
on our web site you should find all the data which are usual, i.e. m2,
feet2 and Newton.
And we always calculate it at 130 km/h.
So the windload on the 9-5 is 578 Newton = 0.72square meters  = 7.8 square
feet.

I am not doing the calculation, a friend of mine has written a program
which is doing the work.
The program checks what is the bigger wind resistance, the boom or the
elements when pointing into the wind with the maximum surface.
<unquote>

>From this I assume that the antenna at some angle to the wind has a
maximum surface area of 7.8 ft sq and at 130km/h offers a windload of 578
Newton.

Maybe someone can comment upon this interpretation as well.

My heavy duty 12 metre crank up/fold over tower has an unguyed and
extended "area of headload" rating for "tubular aerials" at 130km/h
(80mph) of 24.5 ft sq.  At 100mph 14.4ft sq and 120mph 8.7ft sq.  80mph
winds would be very unusual here and higher speeds even more so, an OB9-5
on a PST61D on my tower should be pretty solid, even taking into account 
the wind area of the rotator and mast.

We had a blow a couple of weeks ago that was 55kt sustained peaking 75kt
that caused a little damage around town.  My 6ft sq log and rotary 20m
dipole above didn't complain.  I couldn't telescope the tower if I wanted
to 'cos the wind pressure stopped the top section from lowering under
gravity.  A pull down rope would seem useful in extreme circumstances.

Regards,

Mike VP8NO

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>