The "One Shot" CadWeld was already mentioned.
Here's what's involved in using them.
http://www.rogerhalstead.com/ham_files/ground.htm
Good luck
Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com
> HI All:
> I am putting in a ground system at my new QTH. Will have a ground ring at
> the tower with (4) ground rods, plus (2) radials plus a home run separate
> but in parallel with the RF and control cables running to the tower from
> the
> shack (about 90 ft).
> There will be three rods along each radial leg.
> I know Cadweld (or equal) is the best ground wire to rod connection, but
> what should I use as 2nd best? Cadweld seems to be rather expensive, and
> takes some skill to implement.
> Open to any suggestions.
>
> Bob, W5LT
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|