Towertalk
[Top] [All Lists]

Re: [TowerTalk] mismatch at feed, ok at transmiter

To: <garyschafer@comcast.net>,"'TowerTalk'" <towertalk@contesting.com>,"'Jim Lux'" <jimlux@earthlink.net>
Subject: Re: [TowerTalk] mismatch at feed, ok at transmiter
From: "Bill" <w7vp@comcast.net>
Date: Sat, 15 Apr 2006 09:57:37 -0700
List-post: <mailto:towertalk@contesting.com>
Gary
I have not tried to measure it and so far I have only anecdotal experience. 
It will take time to see the true difference.  Nevertheless the difference 
in a mid level signal is very noticeable aurally and weak signals that do 
not reach Q5 on the tribander are reaching very copyable levels on the 
monobander.

73
Bill
W7VP
----- Original Message ----- 
From: "Gary Schafer" <garyschafer@comcast.net>
To: "'Bill'" <w7vp@comcast.net>; "'TowerTalk'" <towertalk@contesting.com>; 
"'Jim Lux'" <jimlux@earthlink.net>
Sent: Saturday, April 15, 2006 9:00 AM
Subject: Re: [TowerTalk] mismatch at feed, ok at transmiter


>
>
>> -----Original Message-----
>>
>> From: "Bill" <w7vp@comcast.net>
>>  I
>> have had a big 20 meter yagi for more than 30 years.  It came as a Bill
>> Orr
>> type design with 4 elements equally spaced on a 36 foot boom and a T-
>> match.
>>
>> I just put the antenna backup last week after having it down for almost
>> three years and I am always astounded how good it is.  It is at least 3
>> s-units better than my Swan tribander on a separate tower at the same
>> height.
>
> 3 S units better would seem an unrealistic number even compared to a poor
> dipole. How many db difference have you measured?
>
> 73
> Gary  K4FMX
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>