Tom,
Why not put the three verticals in a right triangle.
You can remotely switch the phasing using voltage over the coax so it
will beam four compass directions.
Mine were [and will be soon] phased for NE, SE, SW, NW with 0, +DC, -DC,
AC voltage for those directions.
Contact me for info if you're not familiar with the remote switching
circuit[s] which you can use.
I manufacture [one at a time] the control [similar in nature to the old
Heathkit control] and remote head with connections for a SINGLE 1/4-wave
phasing section.
Don
N8DE
Tom Osborne wrote:
> Howdy all
>
> I'm putting my 3 40 meter phased verticals back up after the storms took
> them down.
>
> A question I have is, if I put my stubs back in the line, is it going to
> mess up the phasing? I'm using 1/4 wave phasing lines on the verticals and
> 1/4 wave stubs (2 of them) in the line. Thanks and 73
> Tom W7WHY
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|