Why not build an off center fed dipole with a feedpoint at 1/3 from one end.
They work at even harmonics. You only have to use a 4:1 balun instead of a
1:1.
Tune for 1.8 and it works at 3.6 too.
73, Jerry K0TV
----- Original Message -----
From: "Mike Brown" <k9mi@sbcglobal.net>
To: <towertalk@contesting.com>
Sent: Saturday, February 18, 2006 11:44 PM
Subject: Re: [TowerTalk] 80 M / 160 M dipole
> Ed, you just need to spread the legs out. 90 degrees would be great, but
> of
> course if you can't do that, just do the best you can.
>
> 73, Mike K9MI
>
>
> ----- Original Message -----
> From: "Ed Stallman" <n5blz@ev1.net>
> To: <towertalk@contesting.com>
> Sent: Sunday, February 19, 2006 03:20
> Subject: [TowerTalk] 80 M / 160 M dipole
>
>
>> Any problem with putting both 80 M / 160 M dipole on one feed line?
>> Thanks Ed N5BLZ
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|