Thanks for the responses. The help area reminded me to check a few things
and I had not set the source to current, it was set as split voltage. I
change this and all is working now.
To answer another question, I found and just subscribed to the "Antennaware"
list at http://lists.contesting.com/mailman/listinfo for modeling
software.
Thanks everybody,
73, de Jim KG0KP
----- Original Message -----
From: "Al Williams" <alwilliams@olywa.net>
To: "Jim Miller" <JimMiller@STL-OnLine.Net>
Sent: Thursday, January 19, 2006 8:11 AM
Subject: Re: [TowerTalk] eznec
> If you find a reflector for eznec, please let me know. I have been using
> Eznec for several years and have never seen that problem, but then I have
> not modeled a fan dipole.
>
> The eznec manual index does not include junction or mult jctn. The ARRL
> Antenna Modeling Course book has a section titled "complications of wire
> junctions" and mentions that NEC2 has a limitation of 30 wires connected
to
> a single junction but then goes on to state that "...I have used 30-60
> radials in a juction with no apparent problem.
>
> I would suggest that you start with a simple dipole and then begin
> increasing the wires in the fan to try to see when the
> warning appears. Please let me know or if someone else have given the
> answer to you.
>
> Again, please let me know if you learn of an eznec reflector.
>
> 73 k7puc
>
>
>
> ----- Original Message -----
> From: "Jim Miller" <JimMiller@STL-OnLine.Net>
> To: "TOWERTALK" <TOWERTALK@contesting.com>
> Sent: Thursday, January 19, 2006 5:37 AM
> Subject: [TowerTalk] eznec
>
>
> > Is there a reflector for eznec?
> >
> > I am new at eznec and when I try to model a fan dipole, I get "mult
jctn",
> > Multiple junction?
> >
> > What is the "trick" to fixing this?
> >
> > Tnx es 73, de Jim KG0KP
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|