Tom,
In the past I have used vise-grips and also brass ground wire connectors.
The kind that fit around the rod. I have used both of them successfully in
conjunction with a car jack. I have not had the brass break and wouldn't
think that it would do so on rods that are only in the ground 3.5 feet.
Pat, K8PC
----- Original Message -----
From: "Georgens, Tom" <Tom.Georgens@netapp.com>
To: <towertalk@contesting.com>
Sent: Saturday, November 12, 2005 3:08 PM
Subject: [TowerTalk] Yanking out ground rods
>I have a number of ground rods that I need to pull out of the ground.
>
> They are 5/8 inch copper clad steel. They are about 3.5 feet in the
> ground with about 6 inches exposed.
>
> I cannot pull them out by hand and I have no way to grap them to use
> some type of mechanical advantage.
>
> Any ideas welcome
>
> Thanks and 73, Tom W2SC 8P1A
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|