Towertalk
[Top] [All Lists]

Re: [TowerTalk] Taking delivery of crankup tower

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Taking delivery of crankup tower
From: "Pat Chiles" <chilesp@adelphia.net>
Date: Thu, 3 Nov 2005 09:56:15 -0500
List-post: <mailto:towertalk@contesting.com>
I took delivery of a US Tower 555hdx last November.  I used a front loader 
(neighbor had one) to get it off the truck and move it to a pad.  I did not 
have to deal with width constraints.

I would not worry too much about bending the tower.  I bought a car towing 
strap rated at 5 tons and used that to lift the tower.  My first guess and 
attachment was not near the balance I wanted so adjustments were made.  I 
wound up attaching the ends of the strap about 6 feet apart and carried it 
that way.

I also collected ideas on what to do before I bought the tower.  The things 
that came up over and over were use a tow truck to lift and move it or use 
furniture dollies and plywood after lifting it off the truck.  One guy 
suggested 3 fifty gallon drums to move it.  Another gentleman suggest boards 
and a cut-up telephone pole to roll it on.

Be sure to inspect the tower very closely before taking delivery.  If it is 
damaged refuse delivery.

----- Original Message ----- 
From: "Kelly Johnson" <n6kj.kelly@gmail.com>
To: <towertalk@contesting.com>
Sent: Wednesday, November 02, 2005 5:17 PM
Subject: Re: [TowerTalk] Taking delivery of crankup tower


>I haven't ordered the tower yet so I can't be totally sure, but it is 
>almost
> certainly going to be a 54/55 footer made by Tashjian Towers or US Tower. 
> It
> will be an HD lattice model OR it will be one of the old "sky needle" 
> types
> made by Tashjian. It will probably weigh about 900lbs and have a retracted
> height of about 23". Does that help?
>
>
> On 11/2/05, paul@w8aef.com <paul@w8aef.com> wrote:
>>
>> What size of crankup tower are you talking about?
>>
>> I have transported many towers and may be able to offer advice, but it
>> depends on the tower.
>>
>> de Paul, W8AEF
>>
>> ----- Original Message -----
>> From: "Kelly Johnson" <n6kj.kelly@gmail.com>
>> To: <towertalk@contesting.com>
>> Sent: Wednesday, November 02, 2005 4:32 PM
>> Subject: [TowerTalk] Taking delivery of crankup tower
>>
>>
>> > Any recommendations on how to take a crankup tower off the delivery
>> truck
>> > and transport to the back yard without a crane or 10 strong men? They
>> are
>> > heavy and need support on both ends and the middle to prevent damage.
>> > There
>> > is less than 10 feet (probably closer to 7 or 8 feet ) between the 
>> > house
>> > and
>> > side fence so transporting it to the backyard on a car carrier (or
>> > similar)
>> > is not an option.
>> > ____________
>>
>>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>