New to this wonderful hobby! Currently learning code and will
(hopefully) be General by Christmas-
-I acquired and old R6 50' tower that, for its age, is immaculate. My
idea is to sacrifice one ten foot section to make the tower a tilt over.
It will be anchored at the 15' level with a bracket attached to the
house. Cant use guys due to the station manager/XYL edict HI
HI.................so net height will be 40'. I have a Wilson Tri band,
a 2/440, and a scanner antenna that will initially be up---fed down to
an automatic switcher, followed by 150' of hard line in to the shack.
My question is two fold---is this practicle, and does anyone have plans
to fabricate a fold over, or any ideas???
thanks
73
K8MCN
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|