Hi,
I'm finally there - ready to tune my 160M shunt fed tower antenna. I
have an Omega match using a 7-1000 pF cap for the series capacitor and
5-500 pF for the parallel capacitor. I have my tower attachment
originally at the top of the 72' tower and a 3 wire triangular cage
shunt wire spaced about 2' from the tower.
I have an MFJ 269 analyzer with the MFJ-731 tunable RFI Filter. I'm
ready to start tuning but thought I would ask for any suggestions in the
sequence as I have never attempted this type of tuning before where I
need to adjust the two capacitors. Any suggestions welcomed.
73 and hope to hear you on 160M real soon,
Richard - KJ7CU
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|