Towertalk
[Top] [All Lists]

Re: [TowerTalk] Remote Tuning of Shunt-Fed Tower

To: "Pat Chiles" <chilesp@adelphia.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Remote Tuning of Shunt-Fed Tower
From: Jim Lux <jimlux@earthlink.net>
Date: Thu, 06 Oct 2005 10:17:18 -0700
List-post: <mailto:towertalk@contesting.com>
At 08:20 AM 10/6/2005, Pat Chiles wrote:
>I am planning on implementing a stepper motor remote tuning feature into 
>my shunt fed tower.  Richard, KJ7CU, supplied me with lots of  good 
>information including where he got his motors and controller.  The company 
>has been bought out and the new company want $300 just for their 
>controller and $100 each for their motors.  I can get the parts I need for 
>about $220 from other companies I found on the Internet.  Does anyone know 
>of a source that sells steppers and controllers with an eye to the 
>hobbyist at a lower price than I have found?
>Pat, K8PC


Check out stuff aimed at robotics hobby folk.
http://www.jrkerr.com/
http://www.lynxmotion.com/

http://www.jameco.com/ has interface boards.

Look at the web pages for the FIRST Robotics competitions..

Do you want a simple "step and direction" interface, or a "go to position 
X" interface, or what?


>_______________________________________________
>
>See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
>Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
>any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>