----- Original Message -----
From: "Pat Barthelow" <aa6eg@hotmail.com>
To: <towertalk@contesting.com>
Sent: Sunday, October 02, 2005 9:03 PM
Subject: [TowerTalk] Lift cable, Galv Steel, vs Stainless
> then stainless steel lift cable, which according to most wire
> tables,
> has only slightly less tensile stregth than similar galvanized steel
> cable,
> should also easily meet requirements for lift cable for ham towers..
> Or am I, as an unprofessional observer missing or assuming too much?
-----------------------------
That would be a good question for Karl Tasjian. On his web site price
list, he lists 1/4" stainless lift cables for the LM237 and LM470, but
not the LM354.
Dave Hachadorian, K6LL
Yuma, AZ
.
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|