At 04:38 PM 9/28/2005, you wrote:
>G'day,
>
>I wonder if anyone can point me in the direction of a supplier for fibre
>glass rod suitable for bridging the centre of a split driven element. The
>element I am assembling is the heavy duty 20m unit from the ARRL antenna
>Handbook and it will need to be 7/8 inch diameter to fit within the 1 inch
>O.D. tube tripler. I'm only looking for approximately 12 inches. DX
>Engineering only list a component for 3/4 inch O.D. tube.
>
>Regards,
>
>Mike VP8NO
Mike--
Max-Gain has 7/8 fiberglass rod for $20 for an 8 ft length. Being a DX station
and him being a ham he may be willing to cut some for you or he may have
some scraps.
http://www.mgs4u.com/fiberglass-tube-rod.htm
--John W0UN
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|