I use this company for all my coax/wire etc. They have some nice rotor cable
and they are excellent in customer service.
http://www.davisrf.com/ham1/rotorcab.htm
Scotty N7HJ
On 8/29/05, Wayne Greaves <wgreaves@pvtnetworks.net> wrote:
>
> I have a 250 ft. (+/-) cable run to a TR-44 rotator. The spec says 1 Ohm
> max cable resistance for "proper operation". 19/29 stranding 16 gauge
> satisfies this requirement at 250 ft. Can anyone recommend a good (i.e.
> cheap) source? The best price I've been able to find so far is TX Towers
> with 2-#12, 6-#16 at $0.89/ ft. Mouser has the exact Belden cable (8621)
> but it's over $1.50/ ft. effectively! Only need 7-wire cable. Thanks.
>
> Wayne, WØZW
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|