You assumed correctly, Tom. Default is open (CW tuning).
I lost your previous post. What material would you use as a gap? Could
this gap be inside the box parallel with contacts, or is it best to run one
side to the boom? If the latter, could the gap be formed by wrapping a
sheet of insulation (such as tape) around the boom, then a copper strap over
that?
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Tom Rauch
Sent: Thursday, August 25, 2005 4:02 AM
To: Ian White GM3SEK; towertalk@contesting.com
Subject: Re: [TowerTalk] Yagi lightning protection
> In this particular case, it seems that the relay contacts
were already
> closed, and then were welded together by current flowing
through them.
I assumed they were normally open and floating when the relay is off. All
they do is short out a small loading inductor. If they are not wired that
way, I'd change that also even if it made the default CW.
73 Tom
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|