Towertalk
[Top] [All Lists]

Re: [TowerTalk] Remote rotor control box

To: towertalk reflector <towertalk@contesting.com>
Subject: Re: [TowerTalk] Remote rotor control box
From: "Alan NV8A (ex. AB2OS)" <nv8a@att.net>
Date: Wed, 24 Aug 2005 10:04:14 -0400
List-post: <mailto:towertalk@contesting.com>
Many of the rotor controllers already permit the use of thinner 
conductors for the control signals and thicker ones for the power 
connections. And Belden (perhaps others too) makes cables with two thick 
conductors and several thinner conductors. Check the AES and HRO catalogs.

73

Alan NV8A


On 08/24/05 06:25 am Dan Bookwalter tossed the following ingredients 
into the ever-growing pot of cybersoup:

> has anyone remoted their rotor control to the tower ??
> i was thinking of either going wireless from the shack
> to the tower or using a couple of small gauge wires as
> control lines...
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>