Towertalk
[Top] [All Lists]

[TowerTalk] Sourcing 120' wood poles

To: dino@daleytower.com, towertalk@contesting.com
Subject: [TowerTalk] Sourcing 120' wood poles
From: "Pat Barthelow" <aa6eg@hotmail.com>
Date: Wed, 17 Aug 2005 11:58:18 -0700
List-post: <mailto:towertalk@contesting.com>
Dino Leblanc Inquired:
>We are looking for (3) 120' treated wood poles for an installation in La.
>This will not be a permanent fixture only temporary. Please send me more
>information...Thank you
Dino,

Go To McFarland Cascasde website.  They have an on line quoting engine for 
any kind of pole you specify.  Fill that out and they will contact you by 
return email...

3 years ago, a 120' class 1, treated Douglas Fir Pole, was quoted to me at 
about $3500.  Plus Shipping, in my case to Central Coast of California, and 
that was about $4000.   Not bad though for a bullet/wind proof, no guys 
required, support of that height, which would support anything and 
everything you would want to put on it.   If your soil tests out 
structurally sound, then according to the local Line crew foreman here, the 
typical bury depth, is:  10% of the height, plus 1 foot.....but...umm... 
there is a lot more to it than that...Engineer time.....

Go To:   http://www.ldm.com/PoleReqInput.asp

73, DX, de Pat  aae6g@hotmail.com


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>