Towertalk
[Top] [All Lists]

Re: [TowerTalk] [BULK] - soldering 259s to buryflex 9914F

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] [BULK] - soldering 259s to buryflex 9914F
From: "Keith Dutson" <kdutson@sbcglobal.net>
Reply-to: keith@dutson.net
Date: Tue, 12 Jul 2005 21:04:19 -0500
List-post: <mailto:towertalk@contesting.com>
I use a 1.5" tubing cutter.

73, Keith NM5G

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Wes Attaway (N5WA)
Sent: Tuesday, July 12, 2005 6:04 PM
To: 'Steve Katz'; 'WW3S'; towertalk@contesting.com
Subject: Re: [TowerTalk] [BULK] - soldering 259s to buryflex 9914F

This is good advice and just about the way I do it, although I have never
tried to do 30 an hour.  All I can add is that you need a decent sized iron
and it does need to be hot so you can do the work quickly.

The sharp knife (or razor blade) is imperative for getting a nice clean cut.
I use a box-cutter utility knife with a fresh blade.

If you get a clean cut the coax goes right in the connector with no trouble.
[snip]

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>