Towertalk
[Top] [All Lists]

[TowerTalk] Guying a Rohn Tower

To: <towertalk@contesting.com>, <vhf@w6yx.stanford.edu>,<vhfcontesting@contesting.com>, <wsvhf@mailman.qth.net>,<cq-contest@contesting.com>
Subject: [TowerTalk] Guying a Rohn Tower
From: "John Geiger" <ne0p@lcisp.com>
Date: Sun, 3 Jul 2005 03:20:49 -0000
List-post: <mailto:towertalk@contesting.com>
I am in the planning stages for getting a tower up in the next couple of years 
(hopefully) and am hoping to get some feedback from the group concerning this.  
Here is my situation:  I don't have much room for guy wires in my yard, nor a 
desire to have guys running all over my yard.  I wonder if I could go with Rohn 
25 or 45 unguyed, as I could use house brackets on 2 sides to help support it.  
I would like to have 40 feet or so of tower, with a 2 element tribander (16 
pounds), a cushcraft 13B2 (5 pounds), and a Cushcraft 719B (3 pounds) mounted 
on the mast-whatever that weights.  Is this a reasonable setup, or would Rohn 
25 or 45 have to be guyed, even with the house brackets?

Or any other suggests for an unguyed tower or mast?  Trying to keep the cost 
down a little also.

73s John NE0P

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>