Gedas wrote:
> Hi everyone. I have found that my HAM-IV is in need of repair. Before I send
> it off I thought I would at least open it up to have a look. It seems to
> turn in one direction only and trying another control box did not solve the
> trouble.
Reassembly is very carefully noting the steps in taking it apart. You
especially should make a scribe mark on both the upper and lower case
to ensure you place it back exactly as it was.
As for the problem, it is more than likely that one of your "end of
direction" cut out switches is open. I would remove the bottom and
check them carefully. Both switches MUST
be closed for the antenna to operate in its normal range. When 1 cut
out is engaged, the only source of power to turn in the opposite
direction is the remaining closed cut out.
BTDT
73
Ed
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|