Towertalk
[Top] [All Lists]

[TowerTalk] Wilson Crankup Tubular Tower Info Request

To: towertalk@contesting.com
Subject: [TowerTalk] Wilson Crankup Tubular Tower Info Request
From: "larryjspammenot@teleport.com" <larryj@teleport.com>
Reply-to: "larryjspammenot@teleport.com" <larryj@teleport.com>
Date: Wed, 4 May 2005 09:20:25 -0700 (GMT-07:00)
List-post: <mailto:towertalk@contesting.com>
I have a chance to pick up what appears to be a Wilson crankup tubular tower 
from a local estate sale - it looks like it has three - tubular telescoping 
sections. After looking through the Towertalk archives, I think it must be a 
Wilson model MT-61 series. The concrete base has some info scratched into it, 
showing that it was installed in 1979. 

I'd be interested to know if there's a site with info for the concrete base 
requirements, info for replacement threaded rods/J-bolts to go in the concrete 
base, etc. What's the weight of the tower? We're trying to figure out how to 
tilt this over safely after releasing the upper house mounting bracket which is 
up about 10 feet above ground, and determine how many people will be needed to 
safely lower it, how to lower it, and carry it to a truck for transport to the 
new QTH.

I'm also assuming that the winch and cables will need to be replaced. Any other 
major maintenance that would need to be done for a tower like this that has 
probably been up for 25+ years in the rainy Northwest?

I do have a bunch of .jpg pictures of it available, if anyone has questions. 

Thanks,
Larry
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>